Other services

Computer control system (depending on BCGE&Hanwha Station/Factory):

  • PV SCADA systems of solar power plants are designed and built according to the structure of a common integrated control system located in the central control room for a single plant, if more than 2 plants are towards an operation control center (OCC).
  • The system uses a professional computer control system solution; real-time data collection and processing system has been used in key projects at the National Dispatch Center (A0) and Regional Dispatch Center. (A2, A3). In addition, the system is capable of controlling and monitoring switchgear CB, Transformer, Inverter, meteological station. In addition, the system also allows to monitor the status and measure each PV and SCB chain of the plant and also the distribution and switching equipment of the Substation in real time.
  • PV SCADA system provides interfaces to connect with station side control system and SCADA/EMS system at dispatching centers according to IEC 60870-5-104 protocol. The PV SCADA system also allows the control system on the TBA side to connect to the dispatching center through the backup channel.

Web operation monitoring system

  • In addition to the ability to monitor and control at the PV SCADA HMI screen, the system also allows monitoring through the remote website interface using the internet. PV SCADA past data can be accessed on that interface. The data here is consistent, immutable. The system's fire field solution prevents illegal access or cyber attacks from the Internet. In the future, the system can be extended to integrate in mobile applications and centrally monitor other factory clusters.

Analyze, evaluate, and optimize power plant performance

FACTORY PERFORMANCE MEASUREMENT (PR TESTING): 

Efficiency (PR - Performance Ratio) is the percentage between the actual power output and the desired power output set at the actual condition at the time of measurement. The PR index represents performance, quality, and issues that need to be addressed to keep the plant operating at ideal efficiency. Thus, the higher the PR, the better the quality of the factory, so it is very important to evaluate the right PR rate according to the commitment in the contract, so it is necessary for a professional and independent unit to help the Investor control. quality, and investment performance of its factory. 

HBOM is an independent organization that evaluates factory PR in order to:

  • Determining the actual PR of the factory according to the commitment between the EPC general contractor and the investor;
  • Evaluate the performance degradation of the PV module according to the manufacturer's commitment;
  • Serving the purpose of handing over the power plant;
  • Find out the causes of performance loss;

PV module cleaning and lawn mowing service, if properly planned, can significantly optimize plant efficiency, not only for PV module cleaning and grass removal, but it can also help improve temperature. operation of PV module thereby improving the efficiency of the plant, and proper cleaning and mowing will reduce the growth time of plants under the farm. 

We provide optimal solutions, in-depth assessment to help plants operate at maximum capacity. Some in-depth evaluations such as using drones to scan and analyze thermal images to evaluate low-performance, overheating modules... evaluation of the I-V curve with the ability to comprehensively evaluate open voltage circuit, short circuit voltage, mpp current, mpp voltage, early detection and replacement of faulty modules thereby preventing fire hazards caused by poor quality modules, reducing mismatch and improving factory PR . 

Asset monitoring tools 

The asset/material/equipment management process will focus on managing supplies, equipment and equipment in clusters of renewable energy plants with a centralized orientation. From there, towards the goal of monitoring, management, operation and rotation of materials and equipment; plan maintenance/maintenance of equipment as needed; as well as inventory management and planning, proposing to the Investor of RE projects to purchase materials and equipment when needed.

Management of materials/equipment/assets

  • All types of electrical - electronic equipment, equipment, materials invested to ensure the operation of the Station and the Power Plant, are the property of the Investor and are managed in accordance with the regulations that is on management and use of assets of the Investor.

Arrange maintenance work

  • The Maintenance Procedure allows the Maintenance Worker to organize the maintenance tasks in a scientific manner. Those are the tasks that have been assigned in the maintenance team. Allows the maintenance manager to see what jobs have been completed, what work is in progress.

Follow up on job requirements

  • The maintenance manager has a comprehensive view of all maintenance tasks on the system. This makes planning and prioritizing tasks more efficient.

Inventory management

  • There are inventory management features. These features are useful because maintenance teams frequently have to manage large volumes of supplies or spare parts. A good inventory system will notify the maintenance manager when the spare parts inventory reaches the minimum allowable inventory level and automatically issue a purchase order.

Buy spare parts

  • Allows Investors to choose suppliers of spare parts right in the CMMS software. When there is a need for spare parts, the maintenance team can make purchase requests on the CMMS software. These purchasing features save time by reducing paperwork and communication time with purchasing/finance.

BUSINESS FIELDS